Sign up for our newsletter to get the latest news and specials!

  Home > AutoTwirler Products > Rotisseries >

  Standard Model



 
Request A Shipping Quote

The AutoTwirler STANDARD is our original fixed height rotisserie model. The pivot point is welded to the top of the upright post. You’ll need to use an external lifting device to lift your car body or frame about 3.0 to 3.5 feet off the ground to bolt the rotisserie to it.

Like our other units, the base is fully welded together for strength and long term durability.

You can balance the car in the same fashion as our PLUS model, but the balancer is not included. It is assumed that if you have a lifting device to raise the car up to mount it, you can use that same lifting device to change the position on the balancer.

The Balancer Kit from our PLUS model which uses the 3/4“ Acme rod is available as an additional option.

The weight is secured by a 1” diameter structural grade bolt that goes through both pieces of tubing in one (1) of five (5) preset balancing positions, making it impossible to drop the car. Especially if you work on the same car all the time, you’ll get used to which hole to mount in from the beginning.

• 3,000 lbs. height adjustable model made of 3” square tubing. The horizontal member of the swing arm is 3/16” thick.
• 36" - 48” High Mounting Height.
• 4 - 16" Mounting Arms.
• 3 piece telescoping center bar allowing 19' of extension.
• Six (6) - 5" Phenolic Casters rated at 500 lbs. each, includes 2 caster locks.
• Weight - 400 lbs. Width - 63". Height - 54". Storage - 72" x 30" x 54"

The AutoTwirler STANDARD is manufactured in Utah and comes with our 1 year caster & jack / 5 year steel warranty. Unless otherwise noted, the AutoTwirler STANDARD ships bare steel. Powder Coating is also available.



Share your knowledge of this product. Be the first to write a review »
AutoTwirler 675 N 600 W STE 2 Logan, UT 84321 Ph: 1-888-810-6970 Email: Sales@autotwirler.com
Copyright ©  Dutro Company. All Rights Reserved.
Built with Volusion